Part Number Hot Search : 
SO2222A AT82NJSZ UNR4213 256LBGA ASM2012C DEI1066 CX82C54 SF801F
Product Description
Full Text Search
 

To Download 67-31A-GHC-YV1W2EZ3-2T Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet Power Top View LED
67-31A/GHC-YV1W2EZ3/2T
Features
P-LCC-3 package.
High flux output. High current capability. White package. Optical indicator. Colorless clear window. Ideal for backlight and light pipe application. Inter reflector. Wide viewing angle. Suitable for automatic placement equipment. Suitable for reflow and wave solder processes. Available on tape and reel (8mm Tape). Pb-free. The product itself will remain within RoHS compliant version.
Descriptions
The 67-31A series is available in soft orange, red and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes the ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium.
Applications
Indicator and backlight for audio and video equipment. Indicator and backlight in office and family equipment. Flat backlight for LCD's, switches and symbols. Light pipe application. General use.
Device Selection Guide
Chip Material InGaN Emitted Color Green Lens Color Water Clear
Everlight Electronics Co., Ltd. Device No. : DSE-67A-042
http://www.everlight.com prepared date:19-Oct-2006
Rev.1
Page: 1 of 10
Prepared by: Ya_Hui Fang
Revision
:1
Release Date:2008-09-20 00:15:58.0 Expired Period: Forever
LifecyclePhase:
EVERLIGHT ELECTRONICS CO.,LTD.
67-31A/GHC-YV1W2EZ3/2T
Package Dimensions
Polarity
Recommended solding pad design
Note: The tolerances unless mentioned is
0.1mm ;Unit = mm
Everlight Electronics Co., Ltd. Device No. : DSE-67A-042
http://www.everlight.com prepared date:19-Oct-2006
Rev.1
Page: 2 of 10
Prepared by: Ya_Hui Fang
Revision
:1
Release Date:2008-09-20 00:15:58.0 Expired Period: Forever
LifecyclePhase:
EVERLIGHT ELECTRONICS CO.,LTD.
67-31A/GHC-YV1W2EZ3/2T
Absolute Maximum Ratings (TA=25 )
Parameter Reverse Voltage Forward Current Peak Forward Current (Duty 1/10 @1KHz) Power Dissipation Electrostatic Discharge(HBM) Operating Temperature Storage Temperature Soldering Temperature Symbol VR IF IFP Pd ESD Topr Tstg Tsol Rating 5 30 100 110 150 -40 ~ +85 -40 ~ +90 Reflow Soldering : 260 Hand Soldering : 350 for 10 sec. for 3 sec. Unit V mA mA mW V
Electronic Optical Characteristics :
Parameter Luminous Intensity Viewing Angle Peak Wavelength Dominant Wavelength Spectrum Radiation Bandwidth Forward Voltage Reverse Current VF
IR
Symbol Iv 2
1/2
Min. 715 --------520 ----2.75 -----
Typ. ----120 518 ----35 ---------
Max. 1800 --------535 ----3.65 10
Unit mcd deg nm nm nm V A
Condition IF=30mA IF=30mA IF=30mA IF=30mA IF=30mA IF=30mA
VR=5V
P
d
Notes:
1.Tolerance of Luminous Intensity 10% 2.Tolerance of Dominant Wavelength 1nm 3.Tolerance of Forward Voltage 0.1V
Everlight Electronics Co., Ltd. Device No. : DSE-67A-042
http://www.everlight.com prepared date:19-Oct-2006
Rev.1
Page: 3 of 10
Prepared by: Ya_Hui Fang
Revision
:1
Release Date:2008-09-20 00:15:58.0 Expired Period: Forever
LifecyclePhase:
EVERLIGHT ELECTRONICS CO.,LTD.
67-31A/GHC-YV1W2EZ3/2T
Bin Range Of Dominant Wavelengths
Group Bin Code X Y Y Z Min. 520 525 530 Max. 525 530 535 nm IF=30mA Unit Condition
Bin Range Of Luminous Intensity
Bin V1 V2 W1 W2 Min 715 900 1120 1420 Max 900 1120 mcd 1420 1800 IF=30mA Unit Condition
Bin Range Of Forward Voltage
Group Bin 5 E 6 7 Min 2.75 3.05 3.35 Max 3.05 3.35 3.65 V IF=30mA Unit Condition
Notes:
1.Tolerance of Luminous Intensity 10% 2.Tolerance of Dominant Wavelength 1nm 3.Tolerance of Forward Voltage 0.1V
Everlight Electronics Co., Ltd. Device No. : DSE-67A-042
http://www.everlight.com prepared date:19-Oct-2006
Rev.1
Page: 4 of 10
Prepared by: Ya_Hui Fang
Revision
:1
Release Date:2008-09-20 00:15:58.0 Expired Period: Forever
LifecyclePhase:
EVERLIGHT ELECTRONICS CO.,LTD.
67-31A/GHC-YV1W2EZ3/2T
Typical Electro-Optical Characteristic Curves
Everlight Electronics Co., Ltd. Device No. : DSE-67A-042
http://www.everlight.com prepared date:19-Oct-2006
Rev.1
Page: 5 of 10
Prepared by: Ya_Hui Fang
Revision
:1
Release Date:2008-09-20 00:15:58.0 Expired Period: Forever
LifecyclePhase:
EVERLIGHT ELECTRONICS CO.,LTD.
67-31A/GHC-YV1W2EZ3/2T
Label explanation
CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank
Reel Dimensions
Note: The tolerances unless mentioned is
0.1mm,Unit = mm
Everlight Electronics Co., Ltd. Device No. : DSE-67A-042
http://www.everlight.com prepared date:19-Oct-2006
Rev.1
Page: 6 of 10
Prepared by: Ya_Hui Fang
Revision
:1
Release Date:2008-09-20 00:15:58.0 Expired Period: Forever
LifecyclePhase:
EVERLIGHT ELECTRONICS CO.,LTD.
67-31A/GHC-YV1W2EZ3/2T
Carrier Tape Dimensions; Loaded quantity per reel 2000 PCS/reel
Note: Tolerances Unless Dimension
0.1mm
Unit = mm
Moisture Resistant Packaging
Label
Aluminum moisture-proof bag
Desiccant
Label
Everlight Electronics Co., Ltd. Device No. : DSE-67A-042
http://www.everlight.com prepared date:19-Oct-2006
Rev.1
Page: 7 of 10
Prepared by: Ya_Hui Fang
Revision
:1
Release Date:2008-09-20 00:15:58.0 Expired Period: Forever
LifecyclePhase:
EVERLIGHT ELECTRONICS CO.,LTD.
67-31A/GHC-YV1W2EZ3/2T
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below. Confidence level 90% LTPD 10%
No.
Items
Test Condition Temp. : 260 5 Min. 5 sec. H : +100 15min 5 min L : -40 15min H : +100 5min 10 sec L : -10 5min Temp. : 100
Test Sample Ac/Re Hours/Cycles Size 6 Min. 22 PCS 0/1
1
Reflow Soldering
2
Temperature Cycle
300 Cycles 22 PCS.
0/1
3
Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity
300 Cycles 22 PCS.
0/1
4
1000 Hrs.
22 PCS.
0/1
5
Temp. : -40
1000 Hrs.
22 PCS.
0/1
6
IF = 30 mA / 25
1000 Hrs.
22 PCS.
0/1
7
85
/85%RH
1000 Hrs.
22 PCS.
0/1
Everlight Electronics Co., Ltd. Device No. : DSE-67A-042
http://www.everlight.com prepared date:19-Oct-2006
Rev.1
Page: 8 of 10
Prepared by: Ya_Hui Fang
Revision
:1
Release Date:2008-09-20 00:15:58.0 Expired Period: Forever
LifecyclePhase:
EVERLIGHT ELECTRONICS CO.,LTD.
67-31A/GHC-YV1W2EZ3/2T
Precautions For Use
1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30 or less and 90%RH or less. or less and 60% RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30
If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60 5 3. Soldering Condition 3.1 Pb-free solder temperature profile
1~5 C / Sec. 260C. Max. 10 Sec. Max. 1~5 C / Sec. Pre-heating 180~200C
for 24 hours.
60 Sec. Max. Above 220C
120 Sec. Max.
3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder.
Everlight Electronics Co., Ltd. Device No. : DSE-67A-042
http://www.everlight.com prepared date:19-Oct-2006
Rev.1
Page: 9 of 10
Prepared by: Ya_Hui Fang
Revision
:1
Release Date:2008-09-20 00:15:58.0 Expired Period: Forever
LifecyclePhase:
EVERLIGHT ELECTRONICS CO.,LTD.
67-31A/GHC-YV1W2EZ3/2T
5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com
Everlight Electronics Co., Ltd. Device No. : DSE-67A-042
http://www.everlight.com prepared date:19-Oct-2006
Rev.1
Page: 10 of 10
Prepared by: Ya_Hui Fang
Revision
:1
Release Date:2008-09-20 00:15:58.0 Expired Period: Forever
LifecyclePhase:


▲Up To Search▲   

 
Price & Availability of 67-31A-GHC-YV1W2EZ3-2T

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X